Calibration Cube Two Color 25mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 25mm cube, designed for calibrating two color printers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 213
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 25mm cube, designed for calibrating two color printers. The main body of the cube is one color (c1), and the letters indicating the axis are another color (c2).
I recently purchased a new printer capable of printing in two colors. Out of the box all the speed settings were turned up way too high, and my prints had a lot of layer shifting. I used the OG calibration cube to tune out the shifting, but once I started printing two colors the shifting came back. I wasn't happy with most of the simple two-color prints available like the two-color cone, as the different colors were separated into different layers. This model has different colors on the same layer.
Revision History
r001 - Initial Release
r002 - Fixed the model orientation, so that when STLs are imported XYZ axis are correctly oriented in slicer