Calibration Cube Two Color 25mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 25mm cube, designed for calibrating two color printers.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 74
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 25mm cube, designed for calibrating two color printers. The main body of the cube is one color (c1), and the letters indicating the axis are another color (c2).
I recently purchased a new printer capable of printing in two colors. Out of the box all the speed settings were turned up way too high, and my prints had a lot of layer shifting. I used the OG calibration cube to tune out the shifting, but once I started printing two colors the shifting came back. I wasn't happy with most of the simple two-color prints available like the two-color cone, as the different colors were separated into different layers. This model has different colors on the same layer.
Revision History
r001 - Initial Release
r002 - Fixed the model orientation, so that when STLs are imported XYZ axis are correctly oriented in slicer