Ancient Greek 7-String Tortoiseshell Lyre

Inspired by ancient Greek art/history, this is a fully playable 7-string lyre that you can print! Included is an STL file with all of the parts combined for reference. This is quite a big print- the body of the lyre is much too large to be printed all in one piece, so I recommend cutting it into however many pieces you're comfortable with (personally I just cut the horns off at their base and printed them separately from the tortoise shell). Even when doing that, the shell prints best at an angle and with organic supports enabled. This was also designed to have each of the main parts combined together with "3-D Gloop!" (or similar adhesives), so if you prefer other methods you'll have to add pins/dowels as needed.

The Tuner Rod End Piece is optional as a simple extra decoration and isn't needed; just be mindful of the small parts when attaching them to the tuner rod if you decide to! I also recommend printing the Tuner Pins with PETG at 100% infill, as they'll need all the strength they can get. They have enough tolerance to be able to slot into the Tuner Rod without much issue, and are long enough for you to push in/pull out the strings as necessary to get the proper tension and avoid them bending too much. Once they're at higher tensions they do have a tendency to slip, so you may want to modify them as you need to get the right fit.