TP-Link TL-SG105 5-port Gigabit Switch Shelf Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a way to get a small 5-port network switch off of a shelf to make room. Decided to hang it underneath the shelf…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 616
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Needed a way to get a small 5-port network switch off of a shelf to make room. Decided to hang it underneath the shelf above. Designed this holder specifically for the TP-Link TL-SG105 switch and to hang from standard hardware-store wire shelving. Printed in ABS, it is strong enough to flex while mounting and go on and off several times. Cutouts for power LED, power cord, front panel, and cooling holes.
Print Settings
Printer Brand:
XYZprinting
Printer:
da Vinci 1.0 Pro 3in1
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2 mm
Infill:
20%
Filament: IC3D ABS Black
Notes:
I used supports in Simplify 3D to get the overhanging clips to print. I used 3 layers of 70% dense supports because the overhang is pretty big and there is a small half-round impression that is supposed to grip the shelf wires. YMMV.
Category: Organization