1 / 3
Solar panel cable holder for aluminum T slot profiles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the DC cables from your PV panels to the aluminum rails. If using micro inverters, it can also guide your AC
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 373
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Holds the DC cables (upto 20mm) from your PV panels to the aluminum rails.
If using micro inverters, it can also guide your AC cables to the junction box.
Nut fits 22x5 mm T profile.
Printable without supports. place wider side down
Print in PETG or ASA 0.6 or 0.4 nozzle. 0.2 layer. Strongest with hex infill 25%
Needs M4x40 hex bolt & M4 nut
Tested with SUNFER aluminum rails