1 / 3
Dial Indicator Mount Prusa MK2 - modified
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
some modification on the original design by slayer1551:https://www.thingiverse.com/thing:2308978 I liked the original…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
some modification on the original design by slayer1551: https://www.thingiverse.com/thing:2308978
I liked the original design idea, but wanted it to be a bit different, namely:
- turn the dial to face the front (!!)
- center the hanging beam (which for some reason was offset)
- reduce the hanging beam length - saving material, printing time and reducing torque on the print head
- added some chamfer on the protruding tabs and on one side below for easier extraction from PEI print area
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Notes:
you can probably print with even lower infill
Post-Printing
1 M6 bolt to secure the dial to the holder
Category: 3D Printer Accessories