Logitech C270 webcam Kossel XL 2020 front mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Logitech C270 webcam mount for 2020x3 aluminum profile, designed for a Kossel XL printer. The webcam is…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
This is a Logitech C270 webcam mount for 2020x3 aluminum profile, designed for a Kossel XL printer.
The webcam is approximately a 10cm distance from the printer, 5cm higher than the bed. It's perfect to view a full bed of 240cm diameter,if the webcam has a wide angle lens (170°). By defaut, this is not the case for this webcam, so you need to change the lens. Here is what I used.
- To assemble the parts (arm in the braket), you'll need a M3x12 to M3x20 screw with a M3 nut.
- To fix the webcam on the arm, you'll need a M3x30 (M3x35 works too) and a M3 nylstop nut.
- To fix the bracket on the 2020 profile, you'll need at least 2x M3x10 screw and 2x t-nuts (or 3 of each, as there is 3 holes).
Print Settings
Printer:
RenRen 3D Pro (Kossel XL)
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Notes:
Support everywhere are required, especially for the arm part.
Category: 3D Printer Accessories