PSU mount for Microcube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount allow to fix the PSU of your microcube inside the printer structure. STL files are for a PSU of 170x85x40mm…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This mount allow to fix the PSU of your microcube inside the printer structure.
STL files are for a PSU of 170x85x40mm (I'm using this one).
But source file (power_supply_holder.scad) is provided if you want to ajust it to different PSU sizes.
There is two STL provided for front holder: one for basic microcube, and another one ("narrow") compatible with a second z axis on the front side of the printer.
Instructions:
- Print a rear holder and front holder
- Clip them in the microcube structure
- Fix the holders with zip ties.
- Put the PSU
- Block the PSU using two zip ties on the bottom of each holder
Print Settings
Printer:
RenRen 3D Pro (Kossel XL)
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Notes:
Easy to print. Use en infill of 40% at least, with good shell tickness: the parts are thin and PSU can be heavy.
Category: 3D Printer Parts