PSU mount for Microcube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount allow to fix the PSU of your microcube inside the printer structure. STL files are for a PSU of 170x85x40mm…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This mount allow to fix the PSU of your microcube inside the printer structure.
STL files are for a PSU of 170x85x40mm (I'm using this one).
But source file (power_supply_holder.scad) is provided if you want to ajust it to different PSU sizes.
There is two STL provided for front holder: one for basic microcube, and another one ("narrow") compatible with a second z axis on the front side of the printer.
Instructions:
- Print a rear holder and front holder
- Clip them in the microcube structure
- Fix the holders with zip ties.
- Put the PSU
- Block the PSU using two zip ties on the bottom of each holder
Print Settings
Printer:
RenRen 3D Pro (Kossel XL)
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Notes:
Easy to print. Use en infill of 40% at least, with good shell tickness: the parts are thin and PSU can be heavy.
Category: 3D Printer Parts