Parts for PCB Drill by Geminy_Studio
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is some alternative parts for the PCB Drill (https://www.thingiverse.com/thing:1846582) by Geminy_Studio. First I…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is some alternative parts for the PCB Drill (https://www.thingiverse.com/thing:1846582) by Geminy_Studio.
First I create a new motor mount for a drill I had laying arount, and that can be found on ebay (http://www.ebay.fr/itm/Mini-Micro-Small-Electric-Aluminum-Hand-Portable-Handheld-Drill-Bits-0-8-1-5mm-/381008422307?hash=item58b5df25a3:g:vI4AAOSw-jhUJrGD). It's in the file mini driller holder.stl.
To avoid pain to add and remove motors' mount in the slider, I design my alternative mount a bit loose. With a few sanding, it fit easly in the slider.
I added a M3 hole to lock the mount in the slider.
So I also added the same hole in the slider itself, which can be found in slider with pin.stl.
I used a M3x20 screw and a M3 nylon nut.
I had hard time having the original Handle_clutch lock in the gear axle. So I created a new one, Handle_clutch_screw.stl, allowing the use of an M3 screw & nut to lock the axle.
Category: Machine Tools