Parts for PCB Drill by Geminy_Studio
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is some alternative parts for the PCB Drill (https://www.thingiverse.com/thing:1846582) by Geminy_Studio. First I…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is some alternative parts for the PCB Drill (https://www.thingiverse.com/thing:1846582) by Geminy_Studio.
First I create a new motor mount for a drill I had laying arount, and that can be found on ebay (http://www.ebay.fr/itm/Mini-Micro-Small-Electric-Aluminum-Hand-Portable-Handheld-Drill-Bits-0-8-1-5mm-/381008422307?hash=item58b5df25a3:g:vI4AAOSw-jhUJrGD). It's in the file mini driller holder.stl.
To avoid pain to add and remove motors' mount in the slider, I design my alternative mount a bit loose. With a few sanding, it fit easly in the slider.
I added a M3 hole to lock the mount in the slider.
So I also added the same hole in the slider itself, which can be found in slider with pin.stl.
I used a M3x20 screw and a M3 nylon nut.
I had hard time having the original Handle_clutch lock in the gear axle. So I created a new one, Handle_clutch_screw.stl, allowing the use of an M3 screw & nut to lock the axle.
Category: Machine Tools