Hanged spray can holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got the idea from the Mostlighting's Spray can holder (http://www.thingiverse.com/thing:1436529). I did not want to…
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 46
- Wydruki
- 2
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got the idea from the Mostlighting's Spray can holder (http://www.thingiverse.com/thing:1436529).
I did not want to make holes on my wall or shelf for each holder, so I design a new one that can be hang.
You just need to use hooks at the begining on a top of a furniture (can be screwed if needed). Then can holder are chained width M3x10 screw and nuts (just screwed between each other, not on the wall/furniture).
I also add a basket to put little thing. A terminator can be used (this time screw are needed) at the bottom of the chain.
OpenSCAD sources are provided, so you can easly make can holder of the diameter you want.
I'm using a chain of more than a dozen of holder, used for weeks now, and it works great.
Print Settings
Printer Brand:
RepRap
Printer:
Renren 3D Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
40%
Notes:
Fair easy to print. You need at leat a 40% infill for strength.
I used PLA, and it's stong enought. ABS may be stronger, but hard to print (long thin items, subject to warping).
Category: Organization