Campagnolo Ultra Torque Bearing 'Setter' Press
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bearing 'setter' aka 'press tool' which I used to hammer new Campagnolo bearings onto my Ultra Torque 11sp cranks
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 347
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Public Domain
This is a bearing 'setter' aka 'press tool' which I used to hammer new Campagnolo bearings onto my Ultra Torque 11sp Chorus cranks. I imagine this press will work for all (Record? Super Record? etc.) Campy Ultra Torque cranks. 
I used:
Campagnolo FC-RE012 Bearings + Seals**
eBay Bearing Puller*
This press
Hammer for press
10mm long hex in this Neiko set
Grease
Freezer for easier bearing install
The second smaller sleeve included in the .3mf is a test sleeve I printed first to see how my printer's tolerances were doing; I didn't want to commit to a 1hr print time for a bearing sleeve I'd have to bore out.
I further intentionally sunk the bearing press into the print bed after thinking I'd: 1) rather the tool have more contact area with the print bed than less, and 2) doubted I'd need all that plastic at the cap to successfully hammer the bearings into place. I was right: the print shortened, and the cap of the press did just fine.
*I didn't realize this was shipping from Shanghai when I ordered, otherwise I would've ordered something somewhat closer to the US.
**I wasn't pumped to buy from BikeInn, but once I realized I'd accidentally ordered a bearing puller from China, I knew I had time to wait for shipping from wherever. TradeInn commonly has great pricing and some rare things on offer.