Ball Bearing Extractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Generic 3D printed Ball Bearing Extractor
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 702
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
I was in need of a ballbearing extractor to fix my washingmachine. But I could not wait a whole day for the shipping. So I spent a whole day designing and printing one (facepalm). And to my surprise, it actually worked.
I printed mine with a 0.6mm nozzle, with 4 perimeters and 8 layers (top and bottom) for all parts. I used PETG for the red parts and PLA+ for the blue parts. I also used an 8mm threaded rod and 3 hex nuts I had lying around. That's all you'll need to know if your crazy enough to print this yourself.
Take in consideration, I used the non-commercial version on Fusion 360. So the same licence applies to this model.