DJI Phantom Quadlock Case adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a Bracket to mount an iPhone12 with a Quadlock case to my DJI Phantom3 drone controller. just a simple…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 67
- Wydruki
- 1
- Wyświetlenia
- 478
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed a Bracket to mount an iPhone12 with a Quadlock case to my DJI Phantom3 drone controller.
just a simple rectangle with the Quadlock case mount to secure the phone phone sitting in Quadlock case was too big for the built in holder, the bracket left pushing the volume and lock buttons. this solved the issue.
I printed in petG at 0.2mm and 25% gyroid infill for strength, had paint on supports for the overhang on the Quadlock bit only, print however you like
This is a remix from https://www.thingiverse.com/thing:2122826
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Prusament PETG Purple
Notes:
Any material does the trick.
Category: R/C Vehicles