Donkey Kong Gameboy Cartridge Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DK themed game box for your Gameboy and Gameboy Advanced cartridges. Can hold 6 at once. Paint if needed :D
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
UPDATE:
I updated the top part so that there's a bit more space to fit the hinge parts together.
This model features a hinge and clasp design. The hinge is designed so that you can just fit the hinge together without any tools. You will need some supports to help print out the DK logo. There should be no supports for the bottom unless your printer cannot bridge well. There should also be some supports for the hinge part in the top half of the box. More details below. After sanding, you can paint it using acrylic paint.
Print Settings: (I use a Flashforge Adventurer 3 pro)
Bottom Half:
- Layer Height: 0.2-0.25mm
- Print speed: 40-60mm/s
- Shell Count: 2
- Brim suggested
- Supports are needed to support some of the parts of the logo. Avoid supports on the bottom unless your printer cannot bridge well.
Top Half:
- Same as Bottom half but some supports are needed to support the floating parts on the hinge cylinders.