Pentax 67 Right Hand Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right hand grip for the Pentax 67 and 6x7 cameras.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 447
- Wydruki
- 1
- Wyświetlenia
- 1949
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
EDIT: DO NOT SELL PRINTS OF THIS FOR PROFIT, and please don't buy from sellers on ebay/etsy etc. I haven't made a single dollar from this design, but ebay/etsy sellers have made thousands, which is really lame, and has prevented me from releasing my improved design.
I was frustrated with the lack of a right hand grip on the Pentax 67 (a camera that is heavy enough that it REALLY needs one). I designed one that uses the strap lugs as anchors (much like the left hand grip made by Pentax). My design uses a keyhole design which locks in place with two m3 x 20mm bolts and two m3 nuts.
Print Settings
Printer:
Monoprice Maker Select i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Post-Printing
Smoothing the keyholes
Before trying to mount the grip I scraped out any gunk due to overhang in the keyholes (minimal). Then I slid the keyholes over a stud one at a time to make sure they were working smoothly before trying to mount both keyholes simultaneously.
Category: Camera