Rycote Invision Shock-Mount replacement base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had a friend who lost the base to their shockmount, I designed a replacement lower (this is the part that allows…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Had a friend who lost the base to their shockmount, I designed a replacement lower (this is the part that allows swiveling and adapt shock mount to the boom pole. This design needs a steel nut to be epoxied into the hexagonal opening at the bottom.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
full
Notes:
If you are going to use this to sling an expensive mic overhead I would recommend you choose settings that increase overall strength. Printing on it's side instead of as a tower also increases the strength of the pinch area.
Designed on my iPad with 123D by measuring part with vernier calipers.
Category: Audio