Rycote Invision Shock-Mount replacement base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Had a friend who lost the base to their shockmount, I designed a replacement lower (this is the part that allows…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
Had a friend who lost the base to their shockmount, I designed a replacement lower (this is the part that allows swiveling and adapt shock mount to the boom pole. This design needs a steel nut to be epoxied into the hexagonal opening at the bottom.
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Infill:
full
Notes:
If you are going to use this to sling an expensive mic overhead I would recommend you choose settings that increase overall strength. Printing on it's side instead of as a tower also increases the strength of the pinch area.
Designed on my iPad with 123D by measuring part with vernier calipers.
Category: Audio