1 / 3
Meanwell UHP-350-24 End Cover (DC Side) Power LED + Microswitch + Heat inserts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added holes for Power LED and Microswitch. Added a "V" on front. Cable hole is now open.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I redesigned the heat insert DC side Cover for the UHP-350-24 from edbdii
If you upgrade to the UWP350 your Minion will be completely silent in standby - so I sometimes forgot to power it off. There is a little LED in the UWP but I wanted a LED on the front side.
Also added a microswitch to control the printer lightning and opened the cable hole for easier installation.
Left hole is ⌀ 8.2mm and right hole ⌀ 6.5mm. Use M3S heat inserts.