1 / 3
Frosthaven Boss Proxy: Harbinger of Shadow — zdjęcie 1
1 / 3

Frosthaven Boss Proxy: Harbinger of Shadow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Here's my proxy model for the Frosthaven boss, the Harbinger of Shadow!

Ocena
5 / 5
Polubienia
22
Pobrania
169
Wydruki
2
Wyświetlenia
551
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

There are two of these guys, so I figured that it would be fun to put together two different models.  The howling one is really easy to print in the upright orientation, only needing a few support points under its body.  The stalking pose needs a lot more support, mainly because of the teeth on the upper jaw.  For both models, I was able to tweak the armor plates on its back and the tentacle angles so that they don't need supports at that orientation.

As always, the .blend file and pre-supported .3mf (including the one that I used to print this on my Prusa MK3, although the support points should work for SLA printers) for this model are available to my patrons at https://patreon.com/VirtuallyJason. If you appreciate my work and have a few dollars to spare each month, please consider joining!

Tagi