10mm rear rack tubing to reflector mount for bike taillight
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a rear rack with 10mm tubing, but no reflector mount, you can use this to attach a taillight to your bike.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
I have a Tubus Airy rear rack on my bike, and I have kind of been wishing I could mount a Specialized Stix taillight to it in a clean fashion. This adapter clips onto 10mm tubing, and then is held in place using two M4 screws with M4x4 heat-stake inserts; you can then screw a taillight to it, as needed. Because the Stix mount has a little thing sticking out of the back of it, this has a channel to clear that.
I recommend printing this out of PETG rather than PLA; PLA doesn't flex enough to happily clip over the tubing. I used Proto-Pasta Empire Strikes Black; installing it over the tubing requires a little bit of believing in yourself. Hardware required:
- 2x M5 x 8mm bolts (to attach the reflector / light to this adapter)
- 2x M4 x 12mm bolts (to tighten to the rack)
- 2x M4 x 4mm heat-stake threaded inserts (I designed against these)
I printed with tree supports on my Bambu X1 Carbon. Tree supports suck on PETG but what you gonna do. At least the supported side is not cosmetic. Print with the side of it against the plate; you want the clip's flexible axis to be printed in the X-Y plane, because they're going to bend a bunch in order to fit over the tubing.
Modeled in Onshape; here's the CAD link.
