65mm "whoop style" 2s Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2s stick battery adapter for a 65mm frame like the Beta65 pro and the UR65 and probably others, those are…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a 2s stick battery adapter for a 65mm frame like the Beta65 pro and the UR65 and probably others, those are the only 2 I have though.
You can either cut out the old battery holder or just leave it, if you leave it then it is just a little tighter of a fit.
I made this to make a 65mm 2s whoop using the Mobula7 flight controller.
I printed it in TPU which is strongly advised as you have to squish it to pop it in place.
0.1mm layer height
infill doesn't matter
with support.
Enjoy.
Update: I realized that I could not use the adapter for 1s if the frames 1s battery holder was missing so I made a v2 that basically has a divider, you can now fly it 1s or 2s with or without the frames original holder, if you leave the frames original holder the first battery can be a little stiff to get inserted for the first few flights.
Category: R/C Vehicles