1 / 5
Nano-Tech 300mah & GNB 450mah battery holder for Mobula7
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This fits between the 2 battery holder bars of the Mobula7 frame, put the longer side in first and then squish and pop…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This fits between the 2 battery holder bars of the Mobula7 frame, put the longer side in first and then squish and pop the other side in.
This also fits the Beta75pro frame if you cut off the existing battery holder trimming it flush and it leaves it with 2 bars just like the Mobula7 frame.
The trimmed Beta75Pro frame is pictured.
Print in TPU, weighs 1.25 grams
Category: R/C Vehicles