Transmitter stand should work on most transmitters, designed for the X9D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I tried the stands for the X9D and they were either too flimsy or didn't tilt back enough so as soon as you sat the…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 2
- Wyświetlenia
- 156
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I tried the stands for the X9D and they were either too flimsy or didn't tilt back enough so as soon as you sat the transmitter down it would fold in and collapse so I designed one.
It leaves the ports on the back of the X9D open so you can use it while connected.
The bottom of the stand swings out far enough to make a sturdy stand.
It should work on most RC transmitters.
I will work on a second one to add that moves the top bar to fit a module better and upload it here.
It needs 4 M3 screws, I used M3x10
Category: R/C Vehicles