Transmitter stand should work on most transmitters, designed for the X9D
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I tried the stands for the X9D and they were either too flimsy or didn't tilt back enough so as soon as you sat the…
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 2
- Views
- 156
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I tried the stands for the X9D and they were either too flimsy or didn't tilt back enough so as soon as you sat the transmitter down it would fold in and collapse so I designed one.
It leaves the ports on the back of the X9D open so you can use it while connected.
The bottom of the stand swings out far enough to make a sturdy stand.
It should work on most RC transmitters.
I will work on a second one to add that moves the top bar to fit a module better and upload it here.
It needs 4 M3 screws, I used M3x10
Category: R/C Vehicles