Counting matching models…
This is an adapter for the TBC Crossfire Micro and Full TX, which will fits right on your FrSky Taranis X-Lite. Wiring All you need to know, how to wire it up, you can find on my Blog: English:…
I designed some fancy switch sleeves for my Taranis QX7. I suspect that they'll fit the X9D and most other radios. Must be printed in a flexible filament. Inspired by these silicone doo-dads: Slicone Transmitter Anti-slipping Stick Switch…
90mm x 56mm x 16mm bend soldering tags (180°) Category: R/C Vehicles
I didn't see a lot of options for Taranis QX 7 gimbal guards so I created this one. The bridge between the gimbal guards sits fairly low and level, which is by design, as I wanted it to be able to be about flush to the lanyard hook. The…
Custom Rotor Riot themed gimbal/stick protectors for FrSky Taranis Q X7.
Stick Protector Taranis QX7 V2 I modified the model so that it fits correctly on the sticks
Update: Updated the feet to allow the transmitter to sit flat on a flat surface, filleted the thumb grips for printing in the face down orientation A replacement for the standard QX7 battery door, designed to be printed on an FDM printer.…
DIY JR Module Arduino and nrf24l01 for RC Taranis X9D. This remix was done, because the nrf24l01 format probably changed and mine did not fit. Category: R/C Vehicles
I've now flown many hours with the stock x9d+ battery and it simply does not last long enough for my liking. I had a few spare 18650's (that I use for my goggles) and I figured they would make a great replacement for the stock battery of…
Taranis Holder. Just tested the mount. Works great. Please upload a photo of your make. This design is not for commercial use or selling! Du möchtest dieses Teil haben? Schreib einfach: Facebook: http://www.bit.ly/contact\_ps915…
Frsky Taranis X9D M9 gimbal protectors There are few options here on Thingiverse...I've wanted better fit and wider opening to fit many custom stick ends (stick opening dia. 12.5 mm) Printed in PLA, infill 100%. M9 gimbals , highly…
A case for transporting my radio to and from flight locations and storing it at home. It has a locking tab at the bottom and a Velcro strap (25mm wide) up top to keep the lid secured. Also has loops for a carrying strap (Up to 25mm wide).…
Cover to protect gimbals during transport in backpack. Designed for Taranis X9 Lite, (may fit others) Material - PLA Infill - 20% Layer height - 0.2 mm Nozzle - 0.4 mm Supports - yes (+45°)
This is a drop in replacement for the original Taranis Q X7 Menu Buttons, Power Button and Dial. I printed these in neon yellow saintsmart TPU and after some tweaking of the model these fit and work absolutely perfect for me! Except for…
A stick protector for a Taranis X7. While I modeled the 3D model from scratch (so it isn't a direct remix), the design is largely based on the linked thing. Prints as a single piece. Modeling was done in blender and the source file is…
Print it yourself or order from Shapeways ! This gimbal protector has a larger size hole for the stick, to accommodate the stick of the M9 gimbal. Category: R/C Vehicles
Recently got back into FPV, but annoyingly enough the stock battery that came in my FrSky Taranis X9D Plus seems to hold approx 200-300mAh, down from the 2000mAh it was originally supposed to hold… Combined with an ELRS TX module, this…
I sold these on eBay for awhile, so I made sure the design slides on and off without too much effort. Overture's PLA Plus worked well for this as it is stronger than normal PLA which is important as the clips are relatively small. Other…
Battery tray to mount 18650 batteries into a taranis X7 radio. Requires an off the shelf 18650 holder to harvest its terminals. the holder itself is too tall to fit a stock taranis.…
These stick ends provide a lot more grip and comfort than standard ones, they are slightly higher, thicker, and have lots of small spikes which provide great grip, but don't hurt the finger. Works perfectly with hybrid grip, but will also…
Support auf Buildplate notwendig!
This is a device that lets you mount an FPV monitor onto a Taranis Q X7. It requires 4x 8-ish mm M3 bolts (though you could get away with 2x) which clamp the mount onto the radio handle. I printed mine with support on build plate only for…
Taranis X9D+ is an awesome transmitter but I rather like Pult-Radios. This is my pult tray addon for the X9D. I propose to make the Bails, Baseplate and Brackets of Aluminium. All other parts can be printed in 3D. Thanks to rophos who…
Here my Gimbalprotection for the Taranis X9D Plus. It is recommended to use tpu because the component must have a certain elasticity. I use this kind of TPU filament https://amzn.to/41t26LW
Tested and ok with 3s 2200mah Lipo TX power via balancer connector, Crossfire module via XT60/XT30 mods: closed the hole in the back/front larger cutout for powerwires for Crossfire Module print in PLA/ABS, works fine SUPPORT NEEDED…
Print in TPU to be able put it on with little pressure, infill 100% to add more rigidity.
Hi, Using this adapter you can mount rp-sma pigtail and use any external antenna you want. There is no need to modify/cat/etc Taranis' case, just plug adapter instead of original antenna. Category: R/C Vehicles
18650 Cell Holder for the Taranis Q X7 With the part "Lid_Removable_By_Hand" it is possible to remove the battery out of the Taranis Q X7 without any tool. Specs: Internal Cable Routing Charge Plug holder, XT60 recomended To build this…
Battery compartment cover that I modeled for my FrSky Taranis X9D+, since the model I remixed it from has sloppy tolerances and I thought I could do a better job. Keeps the original cover aesthetics, has a thumb grip for easy removal, and…
You probably want to add supports under the small part that sticks out 90 degrees on the clip.
Just bought a Crossfire and didn't find the existing protectors/stands to my taste. Printing them was too much of a hassle and using screws with 3D printed parts has rarely worked out for me. What's more, I'm not sure the other stands fit…
I have always envied the look and functionality of the extended lanyard hook on the X9D. I stumbled across this design on Thingiverse and I had trouble printing it in PETG due to overhangs, gaps, and orientation issues, so I tweaked the…
I sold these on eBay for awhile, so I made sure the design slides on and off without too much effort. Overture's PLA Plus worked well for this as it is stronger than normal PLA which is important as the clips are relatively small. Other…
A table stand for Taranis X9D Plus. This stand has room for the USB cable when playing simulators. Easy to print without supports. Originally published in 2018: https://www.thingiverse.com/thing:2981532 Please post a Make if you make…
Just strap holder for my new radio :) Print Settings Printer: GATE Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 60 Filament: n/a PLA Notes: Printed with support or left/right side as shown. Category: R/C Vehicles
It is a remix of taranis gimbal protector originally designed by ErgoFPV. https://www.thingiverse.com/thing:3191975
I started with using an OrangeRX module to fly my Horizon and DSM2/DSMX equipped RC aircraft. With it not being FCC certified, only operating at 100mW (as opposed to 200mW) and not able to offer full integration into my Taranis radio for…
I got this idea from a print on Thingiverse but it was a plug insert that was intended to be printed with flex. I opted instead to turn it into a nut and bolt and use PLA. Link to the original idea here . I exclusively use either an…
I couldn’t find any support to my liking, so I drew on what I could find on the internet to design my own support.
Simple wall mount for the Taranis X9D - designed so it can be screwed to the wall. Taranis hangs nicely on the wall and is always ready to grab and go flying :) Works nicely :) Category: R/C Vehicles
This is a folding mount for the FRSKY Taranis Q X7 or QX7 S. This will allow you to mount a LCD monitor that has a screw mount on the bottom of the monitor. Included screw size is the standard 1/4"-20 that fits most tripod mount LCD…
I wanted a simple clean wall mount I could hook my transmitters into that can be securely fastened into drywall. This can be printed without supports. Designed for No 8 12x1 1/4 plastic wall plugs/screws, but could work for something…
Just another Taranis trooper made as a Fan Art. Please note that I couldn't print it perfectly right with my FDM printer so I publish it as WIP. As always, "Watch" if you want to be informed of any updates. Category: People
Taranis stick protector Taranis stick protector Taranis stick protector Taranis stick protector Taranis stick protector Category: R/C Vehicles
Broke the bottom USB / S.PORT cover on my old QX7. Made a matchin one in orange and added matching markings on the inside for the ports. Category: R/C Vehicles
Quick remix of this Taranis wall mount. I threw some skadis mounts on the back. All credit to the original designer.
These stick ends try to give you the gamepad thumb stick feeling as you know it from your Playstation or other console, while flying your quad. I found this model on Thingiverse but recreated it from scratch to optimize the printability.…
A Gimbal protector fitted to the Qx7, I've lost a few and I thought it would be a good item to do while trying out a new cad program for the first time. The ones in the photos are not 3d printed but they are what this model is based on.
Had some problems with the thumb-sticks available on thingiverse, a lot of them are not quite easy to print or are just to slippy for my fingers. So I designed my own ones. Fits on the Frsky taranis and other radios with M3 treaded sicks.…
This can be used as a regular replacement battery cover with the advantage that it allows using two 18650 cells. Please see the project page for more information and updates:…
I looked for a tiny and reversible antenna mod adapter (something with no glue, no sanding, no cut, and if I want to put old antenna back again, just pop off the adapter), but I found only a few large parts... Just print it and put some…
Inspired by https://www.thingiverse.com/thing:740638 , but designed to replace the stick ends vs going on top of them. Dimensions for the threaded portion's diameter (3mm) taken from http://www.thingiverse.com/thing:1053117 . Print…
FrSky Taranis X9 Lite Radiomaster Nomad Adapter. Remix of: https://www.thingiverse.com/thing:6855518 Added V2 with more stable standoff if needed now with STEP
Attaches using the holes in the bottom RCMC Taranis dock. RCMC Taranis dock found here: https://www.thingiverse.com/thing:1323103 Print instructions Category: Hobby Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports:…
Description It is convenient to charge your transmitter using any USB-C cable. Other parts 2x 18650 li-ion USB-C charger module https://www.aliexpress.com/item/1005003082097543.html?spm=a2g0o.order_list.0.0.21ef1802JBb5VD 2S Li-ion BMS…
This is a simple wall-mounted holder for the Frsky Taranis Q X 7 remote. It uses 2 screws. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Notes: Print the model right side up and…
This is a TPU connector strap for these gimbal protectors . They do a good job of protecting my gimbals, but they would fall off in my case. I quickly drew up this connector to help them stay on the radio and not roll around when removed…
I've wanted to make one of Eficker's awesome QX7 pistol radios for some time. You can find his work here: https://www.thingiverse.com/thing:2552696 But I couldn't find a Qx7 at a price that I wanted to pay. When the X9 Lite came on the…
I wanted to have the stand for my Taranis, so I designed one. Required hardware: 4x M3x12mm screws 4x M3 nuts (possibly nylon ones are ok too) You can try to use it with just the main part - without screws etc. I used it this way for…
Gimbal Protector for FrSky Taranis X-LITE. Please Test :). Category: R/C Vehicles
This is a small xbox gamepad compatible joystick made from a taranis x9d gimbal and 6 cherry mx switches. If you want to adapt this to other gimbals send me the dimensions (hole size/distance) or use the provided fusion file. You can use…
Gimbal Protectors for FrSky Taranis X9D with Umbrella type stick ends. This stick end is significantly bigger than the original and the lotus type. Since I didn't find anything here i designed and printed my own. Printed in Black PETg @…
A wall mount for a Taranis Q X7 stuck to the wall wit double sided tape
I've printed http://www.thingiverse.com/thing:703700 some time ago to mount my FPV monitor to the Taranis. Thing printed very well, and fitted both the taranis and the monitor, but the screen angle was too flat for me. To solve this, I've…
This is a "reworked" version of the battery cover. Unfortunately, the original design could not accommodate the 3s battery, so I had to start from scratch in Fusion 360 and slightly enlarge the original design. Thanks to this, I could…
Hello, I only use TBS Crossfire on my quads therefore I don't really need the 2,4GHz Module/Antenna. I wanted to remove the antenna because it's often in the way. But I opted to mount a SMA connector for the 2,4GHz just in case I need it…
This is a template for cutting your own grip tape to suit the back of a Taranis X9D Plus. Simply scale the model in the z-axis to attain the thickness you'd like and print the template out - you can then trace around the profiles onto the…
Remix of one part of IdefixRC's DragonLink V3 Advance mount (which in turn was a remix of Jason-wratten's EzUFHF TX holder). Part that was remixed is the cradle that holds the DragonLinkV3 main module/box. Instead of having said part…
Taranis Q X7 external module antenna bracket
These gimbal stabilizers slip over your Taranis QX7's sticks to protect them by preventing movement during transportation in a bag or suitcase.
Designed for my new radio :). Instructions After printing you need to use CA to glue both pars. Next mount internal connector put a little bit CA on 5pin connector case and install module (gently but quickly) into your radio. Wait 5…
Voici un remix du couvercle Accu TARANIS de Wetsparks sur Thingivers mais à coins arrondis. En effet, les coins carrés d'origine empêchent le bon emboîtement du couvercle au dos de la radio. Là .... Nickel. Merci à Wetsparks et à…
Simple transmitter wall mount! Edit(17.11.2015): I added a bigger surface, so you can also put your turnigy transmitter bag on this wallmount! This transmitter bag:…
The following is a remix of CarbonRain's Grand Lotus Gimbal Protector found here: https://www.thingiverse.com/thing:2782210 When I tried printing the original, the hole for the Grand Lotus thumb pad was too small and it couldn't slide…
Yet another Taranis X9D gimble protector. Standard sticks. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 2.1 Infill: 5% Filament: 3DPrintz PETG Category: R/C Vehicles
Heavy duty wall mount for FrSky Taranis Radio. Had to design this version for reason of hanging radio on the wall when there are bulky accessories attached to the radio, like Dragonlink amplifiers etc. Category: R/C Vehicles
This is a quick mount I made to attach a screen to my radio, the holes are sized for 1/4" thread. Printed in ASA, but really any material should be fine.
This is an adapter cup used to install an upgraded speaker into your Taranis Tx. It's designed to pull out the stock one and install a larger, clearer 36mm speaker obtained from the east bay and far east :-) Check Out item # 310952191496…
This is a modification of a very good project "Taranis M7 / M9 Gimbal Protector" Added: Larger holes for "D9X Special Edition" stick tips 2mm cut out the basis for better "isolation" of the guard stick. I was inspired by the original…
Merged design of the X9 grip with the throttle/stearing of the Tarantola NG You will need some M3 screws (Used Round Head Stainless M3x8). Also you will need a new FFC cable (A, 7-10cm, 25 Pin Pitch 0,5). For the optional USB Charger you…
Flightcase for the Taranis Xlite RC transmitter. I've printed the case in PLA. Use 3 or more perimeters for strength.
I'm using the sidepots of my Taranis to control pan and tilt of my Zenmuse Z15 in a 1 man set up. Always felt they were awful to handle. To solve this I've decided to make a longer-front facing lever. They fit like a hat over stock…
This is my remix of curly_cz's great Taranis Q X7 LiIon 18650 battery holder . I removed all horizontal fillets as my printer frequently makes a mess of them when printing at low resolutions. I also removed the supports in the XT60 holder…
This is a mash up of some models from Thingiverse, a com badge that i scaled up and added a hole to. They work great.
for this cable: http://www.banggood.com/120mm-Low-Loss-Antenna-Extension-Cord-Wire-Fixed-Base-SMA-RP-SMA-p-1041608.html?rmmds=myorder and this antenna:…
This mount is designed so I don't have to take off my antenna everytime I pack my transmitter. Feel free to make it too, and don't forget to post a make! Print Settings Printer: Hypercube Evo Rafts: No Supports: Yes Resolution: 0.2…
Got tired of screwing and unscrewing the Diamond antenna, so made a mount for it. Fits in my bag perfectly and holds the antenna in place. Not ideal for longrange but works for me. A little tricky to mount if you decide to keep your…
Rotary switch for you x-lite radio. Find out more http://qczek.beyondrc.com/taranis-x-lite-5-positions-switch/ Print Settings Printer: 3novatica gate Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 Infill: 100 Filament: n/a PLA…
I needed this door for my dsmx hack that i did with my tarannis using is board; https://www.radiocontronics.com/Taranis-Spektrum-Hack-DSMX-Module This is the module cover made by Painless360 only I have removed his logo and replaced it…
Simple hook for taranis, doen't require any support. May fit other radios but I didn't tested.
I have built a mobile phone holder for my FRSky TARANIS in order to use telemetry with my hexacopter and my mobile phone. For my galaxy S4 I have used a comercial case joined to the printed piece with double face adhesive band. The arms…
Originally made for the Turnigy 9X, I was able to fit it to the Taranis with no mods. Works great. Not sure what two bolts and nuts that I used but you will need two small bolts with nuts. Printed with PLA and no supports.
If your Taranis has long Sticks installed from https://rctechnik.de/ then you might need this suitable Sticksafer. Print Settings Printer: Franx 3D Printer Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Das Filament PLA red…
Part that let you rest the radio agains your belly with the USB cabel connected. It is cheaper than the Frsky XSR-SIM Not perfect but it works. if you want to use lock plate it is designed to use some m4 bolts. mine fits snugg and do not…
Easy pop-in gimbal guards that will protect your gimbals while transporting your Taranis. Print Settings Printer Brand: Solidoodle Printer: Solidoodle 4 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 10% Notes: I…
Jig for making a 2.4ghz folded dipole. This is a great antenna you can build yourself following the instructions at the link below. There is also a cover for it to protect the element in my other things.…
The battery that I had for my TX keeps on rattling whenever I was moving around with the transmitter. At the same time, I was always afraid of accidentally damaging something on the exposed PCB underneath. I made this from scratch in…
Print out Outline the internal dimension Cut out Stick it on screen Enjoy scratch free display!
This is box for QLRS. Find out more reading my blog: http://qczek.beyondrc.com/qczek-lrs-meets-taranis-x-lite/ Print Settings Printer: gate Rafts: Doesn't Matter Supports: Yes Resolution: 0.1 and 0.2 Infill: 60 Filament: N/A PLA Category:…
