FrSky Taranis X9D Plus Antenna (Reversible) Mod Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I looked for a tiny and reversible antenna mod adapter (something with no glue, no sanding, no cut, and if I want to…
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 1
- Views
- 246
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I looked for a tiny and reversible antenna mod adapter (something with no glue, no sanding, no cut, and if I want to put old antenna back again, just pop off the adapter), but I found only a few large parts...
Just print it and put some pressure to assemble as you can see in the pictures.
It fits with just a little bit of pressure (not so much), so depending on the accuracy of the printer, you may want to change the X and Y scale (together) between 98~102%. In my case, I printed 100% as it was done.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
100%
Filament: Unknown PLA Black
Notes:
It fits with just a little bit of pressure (not so much), so depending on the accuracy of the printer, you may want to change the X and Y scale (together) between 98~102%. In my case, I printed 100% as it was done.
I designed this piece in Blender, it was quick and easy, basically I put 3 circles with the dimensions of a caliper, I removed and soldered some vertices and extruded to 2.5mm.
Category: R/C Vehicles