1 / 4
FrSky Taranis X9D Plus Antenna (Reversible) Mod Adapter — zdjęcie 1
1 / 4

FrSky Taranis X9D Plus Antenna (Reversible) Mod Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I looked for a tiny and reversible antenna mod adapter (something with no glue, no sanding, no cut, and if I want to…

Ocena
5 / 5
Polubienia
3
Pobrania
31
Wydruki
1
Wyświetlenia
246
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I looked for a tiny and reversible antenna mod adapter (something with no glue, no sanding, no cut, and if I want to put old antenna back again, just pop off the adapter), but I found only a few large parts...

Just print it and put some pressure to assemble as you can see in the pictures.

It fits with just a little bit of pressure (not so much), so depending on the accuracy of the printer, you may want to change the X and Y scale (together) between 98~102%. In my case, I printed 100% as it was done.

Print Settings

Printer Brand:

TEVO

Printer:

Tarantula

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

100%

Filament: Unknown PLA Black


Notes:

It fits with just a little bit of pressure (not so much), so depending on the accuracy of the printer, you may want to change the X and Y scale (together) between 98~102%. In my case, I printed 100% as it was done.

How I Designed This ===================

I designed this piece in Blender, it was quick and easy, basically I put 3 circles with the dimensions of a caliper, I removed and soldered some vertices and extruded to 2.5mm.

Category: R/C Vehicles

Tagi