Liczymy pasujące modele…
I made this to replace the broken cover on my X9D. It's based closely on the original moulding, but with a chamfer at the root of the catch to avoid stress risers and aid printing. It fits nicely on both the FrSky X9D amd Jumper T16. The…
DIY JR Module Arduino and nrf24l01 for RC Taranis X9D. This remix was done, because the nrf24l01 format probably changed and mine did not fit. Category: R/C Vehicles
I've now flown many hours with the stock x9d+ battery and it simply does not last long enough for my liking. I had a few spare 18650's (that I use for my goggles) and I figured they would make a great replacement for the stock battery of…
Frsky Taranis X9D M9 gimbal protectors There are few options here on Thingiverse...I've wanted better fit and wider opening to fit many custom stick ends (stick opening dia. 12.5 mm) Printed in PLA, infill 100%. M9 gimbals , highly…
This is the gimbal protection remix designed because I have the x9d+ SE hall gimbals on my tx16s, and also wanted switch protection since I use a kwad bag. BIG THANKS TO: Tekniqueman with the original protection found here…
Print it yourself or order from Shapeways ! This gimbal protector has a larger size hole for the stick, to accommodate the stick of the M9 gimbal. Category: R/C Vehicles
Recently got back into FPV, but annoyingly enough the stock battery that came in my FrSky Taranis X9D Plus seems to hold approx 200-300mAh, down from the 2000mAh it was originally supposed to hold… Combined with an ELRS TX module, this…
I sold these on eBay for awhile, so I made sure the design slides on and off without too much effort. Overture's PLA Plus worked well for this as it is stronger than normal PLA which is important as the clips are relatively small. Other…
Taranis X9D+ is an awesome transmitter but I rather like Pult-Radios. This is my pult tray addon for the X9D. I propose to make the Bails, Baseplate and Brackets of Aluminium. All other parts can be printed in 3D. Thanks to rophos who…
Here my Gimbalprotection for the Taranis X9D Plus. It is recommended to use tpu because the component must have a certain elasticity. I use this kind of TPU filament https://amzn.to/41t26LW
Tested and ok with 3s 2200mah Lipo TX power via balancer connector, Crossfire module via XT60/XT30 mods: closed the hole in the back/front larger cutout for powerwires for Crossfire Module print in PLA/ABS, works fine SUPPORT NEEDED…
Hi, Using this adapter you can mount rp-sma pigtail and use any external antenna you want. There is no need to modify/cat/etc Taranis' case, just plug adapter instead of original antenna. Category: R/C Vehicles
Battery compartment cover that I modeled for my FrSky Taranis X9D+, since the model I remixed it from has sloppy tolerances and I thought I could do a better job. Keeps the original cover aesthetics, has a thumb grip for easy removal, and…
You probably want to add supports under the small part that sticks out 90 degrees on the clip.
I sold these on eBay for awhile, so I made sure the design slides on and off without too much effort. Overture's PLA Plus worked well for this as it is stronger than normal PLA which is important as the clips are relatively small. Other…
A table stand for Taranis X9D Plus. This stand has room for the USB cable when playing simulators. Easy to print without supports. Originally published in 2018: https://www.thingiverse.com/thing:2981532 Please post a Make if you make…
I got this idea from a print on Thingiverse but it was a plug insert that was intended to be printed with flex. I opted instead to turn it into a nut and bolt and use PLA. Link to the original idea here . I exclusively use either an…
Simple wall mount for the Taranis X9D - designed so it can be screwed to the wall. Taranis hangs nicely on the wall and is always ready to grab and go flying :) Works nicely :) Category: R/C Vehicles
I modified the gimbal protector to fit with the larger sticks. It also has a bigger cutout in the center to accomodate for a aftermarket balance bar. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No Supports: Yes…
I tried the stands for the X9D and they were either too flimsy or didn't tilt back enough so as soon as you sat the transmitter down it would fold in and collapse so I designed one. It leaves the ports on the back of the X9D open so you…
I looked for a tiny and reversible antenna mod adapter (something with no glue, no sanding, no cut, and if I want to put old antenna back again, just pop off the adapter), but I found only a few large parts... Just print it and put some…
This is a TPU connector strap for these gimbal protectors . They do a good job of protecting my gimbals, but they would fall off in my case. I quickly drew up this connector to help them stay on the radio and not roll around when removed…
I wanted to have the stand for my Taranis, so I designed one. Required hardware: 4x M3x12mm screws 4x M3 nuts (possibly nylon ones are ok too) You can try to use it with just the main part - without screws etc. I used it this way for…
This is a "reworked" version of the battery cover. Unfortunately, the original design could not accommodate the 3s battery, so I had to start from scratch in Fusion 360 and slightly enlarge the original design. Thanks to this, I could…
This is a template for cutting your own grip tape to suit the back of a Taranis X9D Plus. Simply scale the model in the z-axis to attain the thickness you'd like and print the template out - you can then trace around the profiles onto the…
Yet another Taranis X9D gimble protector. Standard sticks. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: No Resolution: 2.1 Infill: 5% Filament: 3DPrintz PETG Category: R/C Vehicles
This is a quick mount I made to attach a screen to my radio, the holes are sized for 1/4" thread. Printed in ASA, but really any material should be fine.
Slim back case for the Honor Magic8 Lite. The Honor X9d has the same body (161.9 x 76.1 x 7.8 mm, same camera island and button layout), so it fits that one too. Designed for rigid filament (PLA / PETG): the phone snaps in from the front…
This is a mash up of some models from Thingiverse, a com badge that i scaled up and added a hole to. They work great.
This mount is designed so I don't have to take off my antenna everytime I pack my transmitter. Feel free to make it too, and don't forget to post a make! Print Settings Printer: Hypercube Evo Rafts: No Supports: Yes Resolution: 0.2…
Got tired of screwing and unscrewing the Diamond antenna, so made a mount for it. Fits in my bag perfectly and holds the antenna in place. Not ideal for longrange but works for me. A little tricky to mount if you decide to keep your…
I needed this door for my dsmx hack that i did with my tarannis using is board; https://www.radiocontronics.com/Taranis-Spektrum-Hack-DSMX-Module This is the module cover made by Painless360 only I have removed his logo and replaced it…
Simple hook for taranis, doen't require any support. May fit other radios but I didn't tested.
If your Taranis has long Sticks installed from https://rctechnik.de/ then you might need this suitable Sticksafer. Print Settings Printer: Franx 3D Printer Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: Das Filament PLA red…
This is a streamer mounted on FrSky Tarannis X9D Transmitter metal handle. you will need 1 or 2 pieces of 2mm diameter carbon rod and a 2mm nut/bolts. Note - I was initially worried about a carbon fiber rod could potentially interfere…
Simple antenna protector for the FrSky Taranis X9D Plus, useful when transporting the transmitter in a backpack.
Phone Holder for taranis X9D with a TAROT hook print 3 walls everywhere, and use 35% infill, gyroid is prefrered, no supports
Simple antenna protector for the FrSky Taranis X9D Plus, useful when transporting the transmitter in a backpack.
This is a battery door I whipped up today to hold a 2 cell, 2500mAh 18650 battery I pack I made. The battery is similar to the Strix Power Stix from RMRC. You can use that one if you don't feel like making your own.…
Adapters to fit Radiomaster AG01 Gimbals in to the Taranis X9D. Using stock hardware, you only require 12x JST-PH pins. No cutting, filing, or any permanent changes to your radio. Gimbal depth is the same as stock. Note: You no longer…
