Taranis X9D 3S Battery Hatch +10mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a "reworked" version of the battery cover. Unfortunately, the original design could not accommodate the 3s…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 163
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a "reworked" version of the battery cover.
Unfortunately, the original design could not accommodate the 3s battery, so I had to start from scratch in Fusion 360 and slightly enlarge the original design.
Thanks to this, I could convert the old Taranis charging port into a 12V+ output for FPV Goggles or the PINECIL portable soldering iron.
Thanks to this, I always have a 12V+ power source at hand :)
Battery used:
Gens Ace Soaring 2700mAh 11.1V 30C 3S1P Lipo battery - XT60 plug
Capacity: 2700 mAh
Balance plug: XH
Continuous current 30C
Dimensions 103x33.5x25mm
Maximum charging speed 3C
Plug: XT-60 plug (change to XT-30)
Voltage: 11 ,1V (3-cell)
Weight 190 grams
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
0.12
Infill:
20
Filament: 123-3d PLA Gray
Category: R/C Vehicles