1 / 1
Connector strap for Taranis X9D M9 gimbal protector — zdjęcie 1

Connector strap for Taranis X9D M9 gimbal protector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Connects two gimbal protectors together to help keep them on the radio and prevent losing them.

Ocena
0 / 5
Polubienia
2
Pobrania
23
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This is a TPU connector strap for these gimbal protectors. They do a good job of protecting my gimbals, but they would fall off in my case. 

I quickly drew up this connector to help them stay on the radio and not roll around when removed from the radio. I also use the right angle offset neckstrap connector on my radio which helps this stay on even better. 

Print Settings
  • Filament: TPU
  • Layer height: 0.2mm
  • Infill: 10%
  • Supports: No

Tagi