1 / 3
RC transmitter radio stand - Taranis x9d etc. — zdjęcie 1
1 / 3

RC transmitter radio stand - Taranis x9d etc.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stand for RC transmitter radio. I use Taranis X9D+ but should work well with more models.

Ocena
0 / 5
Polubienia
1
Pobrania
24
Wydruki
1
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

I wanted to have the stand for my Taranis, so I designed one. 

 

Required hardware:

4x M3x12mm screws
4x M3 nuts (possibly nylon ones are ok too)

 

You can try to use it with just the main part - without screws etc. 
I used it this way for sometime, but the stand is quite flimsy in that case.

 

Printing:
No supports needed.

I printed my with 0,16mm layer height using PETG.
My is printed with 2 colours, since filament ran out.

Tagi