2020 SBase mount with 3 external driver mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a mount for an MKS SBase board to mount into my Anycubic linear plus delta. I then added 3 external driver…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a mount for an MKS SBase board to mount into my Anycubic linear plus delta.
I then added 3 external driver mounts to add TMC2100s on X,Y,Z
It has the height of the board set to put the usb/ethernet/sdcard in between the 2 2020 bars in the base of the anycubic, just above the extrusion it mounts to.
It uses M3 screws for the boards and M4 10mm and t-nut screws.
Here is the external driver that I used: https://www.amazon.com/gp/product/B06WVZQWXT
Update: Added the sketchup file and a version without the external driver mounts.
Print Settings
Printer:
Anycubic Linear Plus
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
10%
Category: 3D Printer Parts