Apple Watch Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a dock that fits all watch models (personally tested up to series 6) focused on printability and easy production
- Ocena
- 4,75 / 5
- Polubienia
- 62
- Pobrania
- 540
- Wydruki
- 4
- Wyświetlenia
- 2886
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This dock is intended for the old white charger – the new metal one fits but has a loose fit. It would be awesome if someone wanted to remix the attached files to make an updated model.
Though optional, the design is elevated by using 3x6 magnets to hold the two components together. These should be held in with a dab of super glue. Additionally, the bottom component has a space for an adhesive disc so the dock can be hard-mounted to any surface.
Print instructions
This print isn't too demanding, but I recommend at least 5% infill and a layer height ranging between 0.15 and 0.30mm.