slimline Coke bottle drinker and cover plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Auto drinker for small birds
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Slimline Coke (or similar) bottle auto-drinker. “Through cage” design (ie. will poke through a gap of 50mm (double meshed aviary), allowing the bottle to remain on the outside, and only the drinking reservoir to protrude through.
Cover plate: Used to hide the mesh that will require to be cut, preventing damage to birds. 13mm x 13mm mesh aperture however 13 x 25mm or 25 x 25mm would also work.
Cover plate requires x 2 screws (1"+ approx. x 5mm wide shank max).
PETG. 20% Infill, no rafts required. Supports needed for the water channel. 3+ walls.
* UPDATE 13/05/23 * - Added the back plate (as per photo) for holding the unit into place. A screw or a piece of wood would do the same thing, but to keep things nice and neat, I thought i'd share it. Screw to a piece of wood or similar. Lift up the drinker at the rear and slide out to replace the bottle.