slimline Coke bottle drinker and cover plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Auto drinker for small birds
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 39
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slimline Coke (or similar) bottle auto-drinker. “Through cage” design (ie. will poke through a gap of 50mm (double meshed aviary), allowing the bottle to remain on the outside, and only the drinking reservoir to protrude through.
Cover plate: Used to hide the mesh that will require to be cut, preventing damage to birds. 13mm x 13mm mesh aperture however 13 x 25mm or 25 x 25mm would also work.
Cover plate requires x 2 screws (1"+ approx. x 5mm wide shank max).
PETG. 20% Infill, no rafts required. Supports needed for the water channel. 3+ walls.
* UPDATE 13/05/23 * - Added the back plate (as per photo) for holding the unit into place. A screw or a piece of wood would do the same thing, but to keep things nice and neat, I thought i'd share it. Screw to a piece of wood or similar. Lift up the drinker at the rear and slide out to replace the bottle.