Pelco Adapters for NEMA17 Motors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 4 pieces that I designed for getting NEMA 17 motors into Pelco mounts. Mine was specifically a PT174-24 which…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
This is 4 pieces that I designed for getting NEMA 17 motors into Pelco mounts. Mine was specifically a PT174-24 which has two AC Motors. I wanted to turn it on a satellite dish tracker, then I decided to adapt to make the NEMA 17 fit there.
Details of the project in my blog posts:
https://lucasteske.dev/2021/03/rotor-antenna-parte-1 https://lucasteske.dev/2021/04/rotor-antenna-parte-2
Some videos of the adapters working:
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
30
Filament: 3DX PETG / PLA Black
Notes:
Although PLA works fine, since these motors does heat up under work it's best to print them in PETG.
Category: DIY