1 / 3
Poop Chute Large Magnetic for Bambu Lab X1 Carbon
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1. Put a higher wall around. 2. Added vent grid for the printer vent. 3. I use 4 magnets 10x2.5mm 4. Removed the logo
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1019
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
I found that some poop pieces get caught in the small cross wall and blocked the exit, so I made the following Changes:
1. I removed it and put a higher wall around.
2. Added vent grid for the printer vent since the wall is now higher.
3. I made indents for 4 magnets 10x2.5mm
4. Removed the logo from front.
If you like my design, I would appreciate it if you buy me coffee.
Printed in PLA layer height 0.2
No support
Normal speed