1 / 3
Poop Chute Large Magnetic for Bambu Lab X1 Carbon
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1. Put a higher wall around. 2. Added vent grid for the printer vent. 3. I use 4 magnets 10x2.5mm 4. Removed the logo
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 105
- Makes
- 0
- Views
- 1,019
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I found that some poop pieces get caught in the small cross wall and blocked the exit, so I made the following Changes:
1. I removed it and put a higher wall around.
2. Added vent grid for the printer vent since the wall is now higher.
3. I made indents for 4 magnets 10x2.5mm
4. Removed the logo from front.
If you like my design, I would appreciate it if you buy me coffee.
Printed in PLA layer height 0.2
No support
Normal speed