IKEA Skadis Container - Divider Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Divider tray to fit inside IKEA Skadis Containers
- Ocena
- 5 / 5
- Polubienia
- 82
- Pobrania
- 266
- Wydruki
- 4
- Wyświetlenia
- 1365
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Created this simple divider tray to maximize the space in my Skadis containers for elastic bands and paperclips. Sharing with anyone who may also find something like this useful. Fits my own Skadis containers nicely so hopefully no one encounters a strange fit with theirs.
Assembly & Printing notes:
The divider wall slides into the tray base using a tongue & groove-style connector. While this will help (lightly) fit the two pieces together, I would recommend adding glue into the groove to secure the divider more permanently.
Otherwise, no special settings are needed. I even printed mine in draft mode. The finish is a little rough, but I sanded it down to removed the grittier parts and it worked perfectly for my needs.
****************
Size of the base tray is: 60mm x 77.8mm x 7mm
Size of divider wall is: 70mm x 77.8mm x 2mm