2KG spool holder for Bambu lab P1P
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2KG spool holder for the P1P, OR you can use it as a side mount
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 1737
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2KG spool holder for Bambu lab P1P, it doubles as a side mount if you only use 1KG spools. This will mount on the LH side of the display.
I used the existing screws from the metal spool holder and installed them in the upper holes. Additionally I also used the extra PTFE tube that came with the unit. If you have 2 additional screws ( I think they are 2mm X 6mm) for the bottom that would make it a bit more secure but so far with the 2 top screws it works perfectly.
Settings I used 4 perimeters and 45% infill.
Currently used about 10 KG on this holder
Comment if any improvements can be made!!