iPhone and iWatch Charging Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very simple iPhone 7 Plus and iWatch stand/charging base for your nightstand. It fits the original Apple iPhone…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 232
- Wydruki
- 1
- Wyświetlenia
- 946
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A very simple iPhone 7 Plus and iWatch stand/charging base for your nightstand.
It fits the original Apple iPhone cable and watch charger. Both should be a pretty tight fit and doesn't need glue for either one.
There is a guide for the phone cable to pass underneath the stand and also guides for rubber feet.
If you print it sideways - phone side down - then there is minimal need for support and also the plastic strands will be better oriented for better strength.
Print Settings: I've printed it using PLA @ 10% infill with 4 walls.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
10%
Filament: Amazon Basics PLA Silver
Category: 3D Printing