Toy Train Tracks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toy train tracks compatible with Brio and Ikea Lillabo tracks.
- Ocena
- 5 / 5
- Polubienia
- 138
- Pobrania
- 569
- Wydruki
- 5
- Wyświetlenia
- 3049
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
These are toy train tracks I designed. They should be compatible with Ikea Lillabo and Brio train sets, although I haven't tested them together.
There are other models for similar train tracks, but this provided a good excuse to learn more about OpenSCAD, so I modeled them from scratch using measurements provided by a Toy Train information site.
The OpenSCAD code is located here.
They all print-in-place easily. I printed them at 0.2mm layer height, but I think 0.3mm would work just as well.
The only model that requires supports is hill.stl, I used prusa-slicer to paint supports around the top where the overhanging connector is.