MK1 VW Caddy Pickup light bulb holder.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original bulb holders for the rear lights on MK1 VW Caddy are not the best design for lasting long, as they are…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 1553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Original bulb holders for the rear lights on MK1 VW Caddy are not the best design for lasting long, as they are plastic with metal contacts.
This is a upgrade that uses cheap full metal bulb holders for the combined brake/rear light (BAY15D) and blinker/reverse bulbs (BA15S)
Holder for brake/tail light: https://www.ebay.com/itm/Universal-1157-BAY15D-LED-Light-Lamp-Bulb-Socket-Holder-With-Wire-Connector/153966734883?hash=item23d921ee23:g:rRYAAOSwRn5dEvdo
Holder for turn signal and reverse light: https://www.ebay.com/itm/1156-BA15s-LED-Light-Bulb-Socket-Holder-With-Wire-Connector-for-Car-Truck-OL/383860631190?hash=item595fe06696:g:26AAAOSwluVf2dBg
Tried searching for existing similar design and new commercial ones, but such ones were not found. Only original wiring looms with holders can be found for ridiculous prices.
Print in ABS, since PLA cant handle the heat lamp produces (and sunlight during summer)
Print Settings
Supports:
Yes
Resolution:
0.20
Infill:
15%
Filament: Any ABS Any
Notes:
Will need some supports for the holding tabs. As seen on 2nd and 3rd pic.
Use original seal.
Category: Automotive