[REMIX] Arca-Swiss compatible Camera Backpack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Camera Backpack Mount with a modified baseplate to retain compatibility with Arca Swiss tripod heads.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 2
- Wyświetlenia
- 919
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Nothing apart from the original hotplate_bottom.stl has been modified.
On this part, I added the Arca-Swiss slots in the front and back of the hotplate, so you can still use something like the Joby gorillapod when out and about.
I printed mine with the larger hole facing upwards, so it does not require any supports.
You might want to consider printing it on it's side for added strength, however I have not had any issues with mine printed flat.
WARNING: Use this at your own risk and always make sure your camera is fine, even if the hotplate does break (it is just plastic, after all). I recommend only using this in orientations where there is not a lot of force on the hotplate (i.e. small to medium size lens, upright) and not with things like super front-heavy lenses or weird angles.
STEP and FreeCAD files included if you wish to modify it to fit your needs (not original, but reverse-engineered from original STL).