1 / 1
Losi Mini-B Front Tower Guard — zdjęcie 1

Losi Mini-B Front Tower Guard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quick and dirty solution to protect your shocks when skidding across concrete.

Ocena
0 / 5
Polubienia
13
Pobrania
170
Wydruki
0
Wyświetlenia
1103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

Quick and dirty solution for ripping the Losi Mini-B across pavement. After a few flips and skids, my shock tower as well as the aluminum shock caps have started to grind down.

Ideally this should be printed in TPU and should fit snugly with either the stock shock tower, the carbon fiber shock tower, or a 3d printed shock tower.  However, I had some trouble with my TPU jamming so I printed this in PLA+ and it's held up quite well.

If it doesn't stay attached, use a zip tie to hold it down. This has protected my shocks on the road and takes the brunt of the damage instead of grinding down and ruining the nuts and fastener that hold on the shocks.

Tagi