DHT22 / AM3202 Switchplate wallmount - 68mm hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 774
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor. Sensor gets mounted with a single M2 - M3 screw and nut while the switchplate gets screwed into the wall using 4 tiny wood screws around M3. The hole this mounts into is a standard 68mm switch hole.
In a hollow drywall without insulation i recommend pressing some insulation behind the plate so the sensors reading isn't influenced by cold air in the walls.
Can be extended to maybe mount a NodeMCU or something on the back as well.
If you need one of my things printed or you want to suggest a modification on a part please drop me a message!
If you print one of my things i would be happy about some feedback and a make!
If you like my things please consider supporting my caffeine addiction!
Print instructions
Textured print bed will make the front look better. PETG is recommended.