DHT22 / AM3202 Switchplate wallmount - 68mm hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 41
- Makes
- 0
- Views
- 773
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Simple wall mount for a DHT22 / AM3202 type temperature and humidity sensor. Sensor gets mounted with a single M2 - M3 screw and nut while the switchplate gets screwed into the wall using 4 tiny wood screws around M3. The hole this mounts into is a standard 68mm switch hole.
In a hollow drywall without insulation i recommend pressing some insulation behind the plate so the sensors reading isn't influenced by cold air in the walls.
Can be extended to maybe mount a NodeMCU or something on the back as well.
If you need one of my things printed or you want to suggest a modification on a part please drop me a message!
If you print one of my things i would be happy about some feedback and a make!
If you like my things please consider supporting my caffeine addiction!
Print instructions
Textured print bed will make the front look better. PETG is recommended.