1 / 3
Airbox Adapter for Mikuni Carbs
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 1/4" air intake to a 2" reducer. Fits Mikuni VM34 (and maybe other models)
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 1107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
My Mikuni VM34 (may fit other models) had a 2 1/4" air intake. Had a 2" filter on-hand and that size seems to be much easier to find.
Was hard to find a solution that was long enough to both clear my battery box and side cover. Can confirm it fits and works great with the Mikuni carb. I assume this could also work for other 70s Honda with a similar body style.
Print:
Used Prusament ASA at .15mm and 15% infill. 2 perimeters, but should have probably done more.
Install:
- Obviously be light on torque with a hose clamp. Just enough to create some friction. The print has a small lip to help with extra stability with ribbed hoses.
- Used black liquid (silicon) gasket for connection with carb
- A few dabs of high-temp gel glue at the connection with the carb